7. Turn the rail over and at the corner pockets fold the cloth over the mitered edge as shown in the diagram to the right, stretching the cloth tightly and working out the wrinkles as you staple in the area shown.

8. Pulling the cloth tightly over the rear edge of the pocket facing, staple three places as shown in the diagram to the left at location X.

9. If the rail is an end rail repeat step 8 at the other end of the rail. Then starting at the center of the rail stretch the cloth tightly over the cushion and staple at the center on the bottom of the rail - working toward each end.

10. Trim any excess cloth from the bottom of the rail.