Attaching Cloth - Corner Pockets

1. Place the new cloth on the rail with the nap side down. With the nap of the cloth from the left to the right on the end rails, or from designated head to foot of the table on side rails. The cloth should have an equal amount of overhang at both ends of the rail and extend 1/2" over the featherstrip groove on the cushion side as shown in the figure to the right.

2. Except for approximately 3" at the end of the rail, tap the featherstrip down with the tapping block and hammer as shown in the figure to the left.

3. At each end of the rails pull the cloth toward the rubber cushion an additional 3/4" then tap the remainder of the featherstrip down.